manualshive.com logo in svg

HP 530 - Notebook PC, Management Manual

Share
Download
HP 530 - Notebook PC Management Manual Download Page 343

9-35

Command Line Reference

System Clock Commands

System Clock Commands

These commands are used to configure SNTP on the access point.

sntp 

This command enables the NTP client on the device. The no version of the 
command does not require parameters and resets the address of the NTP 
server, if any.

Syntax

sntp 

<server>

•

server 

- 

The IP address or hostname of a time server (NTP or SNTP). 

Default Setting 

None

Command Mode 

Global Configuration

Command Usage 

The time acquired from time servers is used to record accurate dates and 
times for log events. Without SNTP, the access point only records the time 
starting from the factory default set at the last bootup (i.e., 00:14:00, 
January 1, 1970). When SNTP client mode is enabled, the 

sntp server

 

command specifies the time servers from which the access point polls for 
time updates. The access point will poll the time servers in the order 
specified until a response is received. 

Example 

Command

Function

Mode

Page

sntp 

<server>

Specifies one time servers

GC

9-35

show sntp

Shows current SNTP configuration settings.

MC

9-36

show time

Shows current date and time.

MC

9-36

ProCurve Access Point 530# 

configure

ProCurve Access Point 530(config)# 

sntp 10.1.0.19

Summary of Contents for 530 - Notebook PC



















































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands