Base enclosure
Description
Spare part number
Base enclosure
441625-001
Rubber Feet Kit
438557-001
Before removing the base enclosure, follow these steps:
1
.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2
.
Disconnect all external devices connected to the computer.
3
.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4
.
Remove the battery (see
Battery on page 32
).
5
.
Remove the following components:
a
.
Hard drive (see
Hard drive on page 33
)
b
.
Memory/WLAN module compartment cover (see
Memory module on page 35
)
c
.
Optical drive (see
Optical drive on page 39
)
d
.
Switch cover (see
Switch cover on page 41
)
e
.
Keyboard (see
Keyboard on page 43
)
f
.
Display assembly (see
Display assembly on page 47
)
Remove the base enclosure:
1
.
Release the ZIF connector
(1)
to which the TouchPad cable is attached, and disconnect the TouchPad
cable
(2)
from the system board.
2
.
Turn the computer upside down, with the front toward you.
52 Chapter
4
Removal and replacement procedures
Summary of Contents for 530 - Notebook PC
