HP 530 - Notebook PC, Maintenance And Service Manual

Page: 41 / 138

Hard drive
Description Spare part number
120-GB, 5400-rpm 435775-001
80-GB, 5400-rpm 435773-001
Before disassembling the computer, follow these steps:
1
.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2
. Disconnect all external devices connected to the computer.
3
. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4
. Remove the battery (see Battery on page 32 ).
Remove the hard drive:
1
. Position the computer with the front toward you.
2
. Loosen the two Phillips PM2.5×6.0 screws (1) that secure the hard drive cover to the computer.
3
. Lift the left side of the hard drive cover (2) , swing it to the right, and remove the cover. The hard
drive cover is included in the Plastics/Hardware Kit, spare part number 448431-001.
4
. Grasp the Mylar tab (1) on the hard drive and pull the hard drive (2) to the left to disconnect it from
the system board.
Component replacement procedures 33