Removal and replacement procedures
Maintenance and Service Guide
4–43
Bluetooth module
✎
The Bluetooth module spare part kit does not include a Bluetooth module cable. The Bluetooth module cable is
available using spare part number 531811-001.
Before removing the Bluetooth module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
“Battery” on page 6
).
5. Remove the following components:
a. Hard drive (see
“Hard drive” on page 8
)
b. Optical drive (see
“Optical drive” on page 19
)
c. Keyboard (see
“Keyboard” on page 21
)
d. Switch cover (see
“Switch cover” on page 25
)
e. Speaker assembly (see
“Speaker assembly” on page 27
)
f. Display assembly (see
“Display assembly” on page 28
).
g. Top cover (see
“Top cover” on page 37
).
Remove the Bluetooth module and cable:
1. Disconnect the Bluetooth module cable
1
from the system board.
2. Remove the Bluetooth module cable from the clips
2
built into the base enclosure.
3. Remove Bluetooth module and cable
3
.
Reverse this procedure to install the Bluetooth module.
Description
Spare part number
Bluetooth module
483113-001
