HP 512424-001 Maintenance And Service Manual Download Page 76

Page: 76 / 154

Removal and replacement procedures

Maintenance and Service Guide

4–31

10. If it is necessary to replace the webcam/microphone module, release the two metal tabs

built into the display

panel shielding.

11. Lift the webcam/microphone module

as far from the display bezel as the webcam/microphone cable allows.

12. Disconnect the webcam/microphone module

from the webcam/microphone module.

13. Remove the webcam/microphone module. The webcam/microphone module is available using spare part

number 531785-001.

14. If it is necessary to replace the display panel cable, fold back the flap built into the display panel shielding

15. Lift the top edge of the display panel cable bracket

and swing it toward you and down.

16. Disconnect the display panel cable from the display panel

Summary of Contents for 512424-001



























































































































































Search results

Summary of Contents for 512424-001

Reviews:

Related manuals for 512424-001

Brands by name

Popular brands

HP 512424-001, Maintenance And Service Manual

Search results

Summary of Contents for 512424-001

Reviews:

Related manuals for 512424-001

Brands by name

Popular brands