HP 4510s - ProBook - Celeron 1.8 GHz Maintenance And Service Manual Download

Page: 100 / 202

If it is necessary to replace the display hinges, remove the display panel by removing the four
Phillips PM2.5×4.5 screws

(1)

that secure the panel to the display enclosure, and then remove the

panel from the enclosure

(2)

Remove the eight Phillips PM2.0×3.0 screws

(1)

that secure the display hinges to the display panel,

and then remove the display hinges

(2)

. The left and right display hinges are available in the Display

Hinge Kit, spare part number 535872-001 for computers with 15-in displays.

Chapter 4 Removal and replacement procedures

Summary of Contents for 4510s - ProBook - Celeron 1.8 GHz











































































































































































































Search results

Summary of Contents for 4510s - ProBook - Celeron 1.8 GHz

Reviews:

Related manuals for 4510s - ProBook - Celeron 1.8 GHz

Brands by name

Popular brands

HP 4510s - ProBook - Celeron 1.8 GHz, Maintenance And Service Manual

Search results

Summary of Contents for 4510s - ProBook - Celeron 1.8 GHz

Reviews:

Related manuals for 4510s - ProBook - Celeron 1.8 GHz

Brands by name

Popular brands