HP 4410t - Mobile Thin Client Administrator'S Reference Manual Download Page 97

Page: 97 / 104

Select

To do this

●

Set the Express Boot Popup delay in seconds.

●

Set the boot order.

Device Configurations

●

Swap the functions of the

key and left

ctrl

key.

●

Enable/disable USB legacy support. When enabled, USB
legacy support allows the following:

◦

Use of a USB keyboard in Computer Setup even
when a Windows operating system is not running.

◦

Startup from bootable USB devices, including a hard
drive, diskette drive, or optical drive connected by a
USB port to the computer.

Built-In Device Options

●

Enable/disable embedded WLAN Device Radio.

●

Network Interface Controller (LAN)

●

LAN/WAN switching

●

Enable/disable Wake on LAN.

●

Enable/disable the optical disc drive.

Port Options

●

Enable/disable the USB port.

●

Enable/disable the ExpressCard slot.

Computer Setup menus

Summary of Contents for 4410t - Mobile Thin Client









































































































Search results

Summary of Contents for 4410t - Mobile Thin Client

Reviews:

Related manuals for 4410t - Mobile Thin Client

Brands by name

Popular brands

HP 4410t - Mobile Thin Client, Administrator'S Reference Manual

Search results

Summary of Contents for 4410t - Mobile Thin Client

Reviews:

Related manuals for 4410t - Mobile Thin Client

Brands by name

Popular brands