3.
In the
Express Boot Popup Delay (Sec)
field, select the length of time in seconds that you want
the computer to display the startup location menu before it defaults to the current MultiBoot setting
(when 0 is selected, the Express Boot startup location menu is not displayed).
4.
To save your preferences and exit Computer Setup, use the arrow keys to select
File
>
Save
changes and exit
. Then follow the instructions on the screen.
Your preferences go into effect when the computer restarts.
Entering MultiBoot Express preferences
When the Express Boot menu displays during startup, you have the following choices:
●
To specify a boot device from the Express Boot menu, select your preference within the allotted
time, and then press
enter
.
●
To prevent the computer from defaulting to the current MultiBoot setting, press any key before the
allotted time expires. The computer will not start until you select a boot device and press
enter
.
●
To allow the computer to start according to the current MultiBoot settings, wait for the allotted time
to expire.
Choosing Multiboot preferences
83
Summary of Contents for 4410t - Mobile Thin Client
Page 1: ...HP 4410t Mobile Thin Client Administrator Reference Guide ...
Page 4: ...iv Safety warning notice ...
Page 104: ......
