HP 3PAR StoreServ 7000 Administrator'S Manual Download Page 194

Page: 194 / 204

Table 25 Super Rights

(continued)

Description of Right

Right

Admit a physical disk to the system.

pd_admit

Spin up or spin down a physical disk.

pd_control

Dismiss a physical disk from the system.

pd_dismiss

Move relocated chunklets from one physical disk to another.

pd_movereloc

Move used chunklets from a physical disk to spare space.

pd_movetospare

Set physical disk properties.

pd_set

Update physical disk firmware.

pd_upgrade

Perform diagnostic tests on ports.

port_check

Control and configure ports.

port_control

Remote copy link validity checks.

rclink_check

Start the remote copy service.

rcopy_start

Stop the remote copy service.

rcopy_stop

Synchronize remote copy groups.

rcopy_sync

Create a remote copy group.

rcopygroup_create

Remove a remote copy group.

rcopygroup_remove

Set remote copy group properties.

rcopygroup_set

Start remote copy group.

rcopygroup_start

Stop a remote copy group.

rcopygroup_stop

Add remote copy links.

rcopylink_admit

Dismiss remote copy links.

rcopylink_dismiss

Add a target to a remote copy volume.

rcopytarget_admit

Create a remote copy target.

rcopytarget_create

Dismiss a remote copy target from a group.

rcopytarget_dismiss

Remove a remote copy target.

rcopytarget_remove

Set remote copy target properties.

rcopytarget_set

Add a volume to a remote copy volume group.

rcopyvv_admit

Dismiss a virtual volume from a remote copy group.

rcopyvv_dismiss

Move virtual volume regions between LDs.

reg_move

Create a schedule for tasks.

sched_create

Remove a schedule for tasks.

sched_remove

Set any user scheduled task properties.

sched_setany

Set a user's own scheduled task properties.

sched_setown

Update snapshot space accounting information.

snapspace_update

Add an SNMP manager.

snmpmgr_add

Remove an SNMP manager.

snmpmgr_remove

Remove an SNMP community strings.

snmppw_remove

194

Mapping Roles and Rights

Summary of Contents for 3PAR StoreServ 7000













































































































































































































Search results

Summary of Contents for 3PAR StoreServ 7000

Reviews:

Related manuals for 3PAR StoreServ 7000

Brands by name

Popular brands

HP 3PAR StoreServ 7000, Administrator'S Manual

Search results

Summary of Contents for 3PAR StoreServ 7000

Reviews:

Related manuals for 3PAR StoreServ 7000

Brands by name

Popular brands