For additional information on the McDATA 4Gb SAN Switch for HP p-Class BladeSystem please see the
following URL:
http://h18006.www1.hp.com/products/storageworks/mcd4gbsanswitch/index.html
NOTE:
NOTE:
NOTE:
NOTE: Both Brocade and McDATA SAN switches are shipped in singles (one switch per kit), for
redundant configurations please order two switch kits.
HP ProLiant BL p-Class
HP ProLiant BL p-Class
HP ProLiant BL p-Class
HP ProLiant BL p-Class
RJ-45 Patch Panel
RJ-45 Patch Panel
RJ-45 Patch Panel
RJ-45 Patch Panel
(Two patch panels per kit)
(Every BL p-Class server
blade enclosure requires
two Interconnect switches
OR two RJ-45 patch
panels)
6U (10.5-inch), Plugs into HP BladeSystem p-Class 6U server blade enclosures
Used to pass NIC signals from all server blades in server blade enclosure out as RJ-45 connections
Supports Gigabit Ethernet network adapters
16 RJ-45 connectors on the back of each BL p-Class 6U RJ-45 Patch Panel (32 RJ-45 connections per
server blade enclosure)
HP ProLiant BL p-Class
HP ProLiant BL p-Class
HP ProLiant BL p-Class
HP ProLiant BL p-Class
RJ-45 Patch Panel 2
RJ-45 Patch Panel 2
RJ-45 Patch Panel 2
RJ-45 Patch Panel 2 (with
Fibre Channel pass
through)
(Two patch panels per kit)
(Every BL p-Class server
blade enclosure requires
two Interconnect switches
OR two RJ-45 patch
panels)
NOTE:
NOTE:
NOTE:
NOTE: The Patch Panel 2
or a Switch Interconnect
Kit is required for SAN
connectivity on HP
6U (10.5-inch), Plugs into HP BladeSystem p-Class 6U server blade enclosures
Used to pass NIC signals from all server blades in server blade enclosure out as RJ-45 connections also
used to pass Fibre Channel signals for SAN connectivity
Supports Gigabit Ethernet network adapters
16 RJ-45 connectors on the back of each RJ-45 patch panel 2 (32 RJ-45 connections per server blade
enclosure)
Fibre Channel,
Fibre Channel,
Fibre Channel,
Fibre Channel,
pass through
pass through
pass through
pass through
Fibre Channel signals travel from a HP ProLiant BL25p server blade with a
Dual-Port Fibre Channel Adapter through p-Class server blade enclosure
backplane. The Fibre Channel signals are terminated through the RJ-45
Patch Panel 2 in the interconnect bays. To provide redundancy each server
blade has two Fibre Channel signals and one Fibre Channel signal
terminates through the right RJ-45 Patch Panel 2, one Fibre Channel signal
travels terminates through the left RJ-45 Patch Panel 2.
8 Fibre Channel small form factor pluggable (SPF) transceiver slots on the
front of each RJ-45 patch panel 2 (16 Fibre Channel connections per server
blade enclosure); for insertion of SPF transceivers included with the BL20p
G3 Dual-port Fibre Channel Adapter.
Required Network
Required Network
Required Network
Required Network
Cabling
Cabling
Cabling
Cabling
10Base-T
Categories 3, 4 or 5 UTP (100 meters)
EIA/TIA-568 100-ohm STP (100 meters)
100Base-TX
Category 5 UTP (100 meters)
EIA/TIA-568 100-ohm STP (100 meters)
1000Base-T
Category 5 UTP (100 meters)
EIA/TIA-568 100-ohm STP (100 meters)
1000Base-SX
50/125 µm Multimode Fiber, 400 MHz/Km (500 meters)
50/125 µm Multimode Fiber, 500 MHz/Km (550 meters)
62.5/125 µm Multimode Fiber, 160 MHz/Km (220 meters)
62.5/125 µm Multimode Fiber, 200 MHz/Km (275 meters)
NOTE:
NOTE:
NOTE:
NOTE: For cabling information, refer to the Web site at:
http://www.compaq.com/products/servers
.
QuickSpecs
HP BladeSystem p-Class Interconnect Components
HP BladeSystem p-Class Interconnect Components
HP BladeSystem p-Class Interconnect Components
HP BladeSystem p-Class Interconnect Components
Standard Features (HP BladeSystem p-Class Interconnect Components)
DA - 12331 Worldwide — Version 4 — September 12, 2007
Page 5
