HP 345561-001 Startup And Reference Manual Download Page 26

Page: 26 / 160

2–6

Startup and Reference Guide—Part 2

Hardware

Lights

Top: Lights

Num lock light

On (green): Num lock or the internal
keypad is on.

Caps lock light

On (green): Caps lock is on.

Mute light

On (orange): Volume is muted.

Wireless device light
(available on select models)

On: The wireless device button is
turned on and an integrated wireless
device is hardware enabled.

Battery light

On: The notebook is receiving
adequate external power.

■

On orange: A battery pack is
charging.

■

On green: A battery pack is fully
charged.

■

Flashing: A battery pack is
malfunctioning and may need to be
replaced.

IDE (Integrated Drive
Electronics) drive light

On: The internal hard drive or optical
drive is being accessed.

Power/standby light

On: Notebook is turned on.
Flashing: Notebook is in Standby.

345561-001.book Page 6 Monday, July 14, 2003 11:19 AM

Summary of Contents for 345561-001

































































































































































Search results

Summary of Contents for 345561-001

Reviews:

Related manuals for 345561-001

Brands by name

Popular brands

HP 345561-001, Startup And Reference Manual

Search results

Summary of Contents for 345561-001

Reviews:

Related manuals for 345561-001

Brands by name

Popular brands