manualshive.com logo in svg

HP 3100 Series, Configuration Manual

The Philips 3100 Series product offers innovation and convenience with its advanced features. Access the comprehensive User Manual, containing detailed instructions and helpful tips, for free download on our website. Elevate your experience and unlock the full potential of your Philips 3100 Series by referring to the manual available at manualshive.com.

Share
Download
background image

 

176 

Configuring LLDP 

Overview 

Background 

In a heterogeneous network, a standard configuration exchange platform ensures that different 
types of network devices from different vendors can discover one another and exchange 
configuration. 

The IETF drafted the Link Layer Discovery Protocol (LLDP) in IEEE 802.1AB. The protocol operates 
on the data link layer to exchange device information between directly connected devices. With 
LLDP, a device sends local device information as TLV (type, length, and value) triplets in LLDP Data 
Units (LLDPDUs) to the directly connected devices. Local device information includes its system 
capabilities, management IP address, device ID, port ID, and so on. The device stores the device 
information received in LLDPDUs from the LLDP neighbors in a standard MIB. For more information 
about MIBs, see 

Network Management and Monitoring Configuration Guide

. LLDP enables a 

network management system to quickly detect and identify Layer 2 network topology changes.  

Basic concepts 

LLDP frame formats 

LLDP sends device information in LLDP frames. LLDP frames are encapsulated in Ethernet II or 
SNAP frames. 

•

 

Ethernet II-encapsulated LLDP frame format 

Figure 63 Ethernet II-encapsulated LLDP frame format 

 

 

Table 21 Fields in an Ethernet II-encapsulated LLDP frame 

Field Description 

Destination MAC address 

MAC address to which the LLDP frame is advertised. It is fixed to 
0x0180-C200-000E, a multicast MAC address.  

Source MAC address 

MAC address of the sending port. If the port does not have a MAC address, 
the MAC address of the sending bridge is used.  

Type 

Ethernet type for the upper layer protocol. It is 0x88CC for LLDP.  

Data LLDPDU. 

Summary of Contents for 3100 Series


































































































































































































































Reviews:

No comments

Related manuals for 3100 Series

Datavideo SE-1000 Reference Manual preview
SE-1000
Brand: Datavideo Pages: 4
Datavideo SE-1200MU Quick Start Manual preview
SE-1200MU
Brand: Datavideo Pages: 66
ANTAIRA LMP-1204G-SFP Series Hardware Manual preview
LMP-1204G-SFP Series
Brand: ANTAIRA Pages: 20
UfiSpace S9180-32X Hardware Installation Manual preview
S9180-32X
Brand: UfiSpace Pages: 25
Equip Vision 332702 Manual preview
Vision 332702
Brand: Equip Pages: 10
Maiwe MIEN2206 User Manual preview
MIEN2206
Brand: Maiwe Pages: 14
Wantec 2wIP-E-S-TW Installation Manual preview
2wIP-E-S-TW
Brand: Wantec Pages: 4
Bamo MAGTOP Snap 201 Manual preview
MAGTOP Snap 201
Brand: Bamo Pages: 2
EtherWAN EX17908 Series Installation Manual preview
EX17908 Series
Brand: EtherWAN Pages: 2
Quintum Tenor BX Product Manual preview
Tenor BX
Brand: Quintum Pages: 79
Epson OT-PH10 Installation Manual preview
OT-PH10
Brand: Epson Pages: 2
Asco J 4000 Series Installation Manual preview
J 4000 Series
Brand: Asco Pages: 20
CYP CPRO-41W Operation Manual preview
CPRO-41W
Brand: CYP Pages: 16
Fort ECSPHB Manual preview
ECSPHB
Brand: Fort Pages: 17
Dell PowerConnect 26 User Manual preview
PowerConnect 26
Brand: Dell Pages: 20
B&B Electronics 232XS5 Manual preview
232XS5
Brand: B&B Electronics Pages: 26
Acnodes IP-S User Manual preview
IP-S
Brand: Acnodes Pages: 71
IDT CPS-12 User Manual preview
CPS-12
Brand: IDT Pages: 129

Brands by name

Popular brands

Load more brands