manualshive.com logo in svg

HP 3100 Series, Configuration Manual

The Philips 3100 Series product offers innovation and convenience with its advanced features. Access the comprehensive User Manual, containing detailed instructions and helpful tips, for free download on our website. Elevate your experience and unlock the full potential of your Philips 3100 Series by referring to the manual available at manualshive.com.

Share
Download
background image

 

22 

Step Command 

Remarks 

1. 

Enter system 
view. 

system-view 

N/A 

2. 

Enter interface 
view or port group 
view. 

•

 

Enter Layer 2 Ethernet interface 
view or Layer 2 aggregate 
interface view:

 

interface interface-type 
interface-number

 

•

 

Enter port group view:

 

port-group

 

manual

 

port-group-name

 

Use either command. 
Settings in Layer 2 Ethernet interface 
view or Layer 2 aggregate interface view 
take effect on the interface only. Settings 
in port group view take effect on all 
member ports in the port group. 
For more information about configuring a 
port group, see "Configuring Ethernet 
interfaces." 

3. 

Disable MAC 
address learning 
on the interface or 
all ports in the port 
group. 

mac-address mac-learning disable

Enabled by default. 

 

Disabling MAC address learning on a VLAN (available only 
on the HPE 3100 v2 EI) 

You can disable MAC address learning on a per-VLAN basis. 

To disable MAC address learning on a VLAN: 

 

Step Command 

Remarks 

1. 

Enter system view. 

system-view 

N/A 

2. 

Enter VLAN view. 

vlan

 

vlan-id

 

N/A 

3. 

Disable MAC address 
learning on the VLAN. 

mac-address mac-learning 
disable 

Enabled by default. 

 

Configuring the aging timer for dynamic MAC 
address entries 

The MAC address table uses an aging timer for dynamic MAC address entries for security and 
efficient use of table space. If a dynamic MAC address entry has failed to update before the aging 
timer expires, the device deletes that entry. This aging mechanism ensures that the MAC address 
table can quickly update to accommodate the latest network changes.  

Set the aging timer appropriately. Too long an aging interval might cause the MAC address table to 
retain outdated entries, exhaust the MAC address table resources, and fail to update its entries to 
accommodate the latest network changes. Too short an interval might result in removal of valid 
entries, causing unnecessary flooding, which might affect device performance. 

To configure the aging timer for dynamic MAC address entries: 

 

Step Command 

Remarks 

1. 

Enter system view. 

system-view 

N/A 

Summary of Contents for 3100 Series


































































































































































































































Reviews:

No comments

Related manuals for 3100 Series

Barksdale 8000 Series Operating Instructions Manual preview
8000 Series
Brand: Barksdale Pages: 6
Datavideo SE-3000 Instruction Manual preview
SE-3000
Brand: Datavideo Pages: 58
E-T-A 921 Series Instructions For Installation Manual preview
921 Series
Brand: E-T-A Pages: 6
Balluff IO-Link BNI LH1-303-S11-K091 Installation Manual preview
IO-Link BNI LH1-303-S11-K091
Brand: Balluff Pages: 12
PRO SIGNAL PSG3450 Manual preview
PSG3450
Brand: PRO SIGNAL Pages: 5
Extron electronics MSW 4SV rs Specifications preview
MSW 4SV rs
Brand: Extron electronics Pages: 2
Westell A99-BAI-ACSF-UGKIT Install Instructions preview
A99-BAI-ACSF-UGKIT
Brand: Westell Pages: 3
Avocent DSR Series DSR1030 Quick Installation Manual preview
DSR Series DSR1030
Brand: Avocent Pages: 8
N-Tron 716M12 User Manual & Installation Manual preview
716M12
Brand: N-Tron Pages: 169
KanexPro HDMX44A-18G Operation Manual preview
HDMX44A-18G
Brand: KanexPro Pages: 35
C&C TECHNIC VAX-8204F User Manual preview
VAX-8204F
Brand: C&C TECHNIC Pages: 2
KinAn DV2302 User Manual preview
DV2302
Brand: KinAn Pages: 5
Velleman VAS4 User Manual preview
VAS4
Brand: Velleman Pages: 8
nedis VMAT3482AT Manual preview
VMAT3482AT
Brand: nedis Pages: 24
Alpha Cordex HP CXRF 48-2.4kW Manual preview
Cordex HP CXRF 48-2.4kW
Brand: Alpha Pages: 56
Madas CE-51AT1438 Manual preview
CE-51AT1438
Brand: Madas Pages: 24
ATEN Altusen KN9008 User Manual preview
Altusen KN9008
Brand: ATEN Pages: 178
AMX Solecis AVS-SL-PR-0201-0301 Operation/Reference Manual preview
Solecis AVS-SL-PR-0201-0301
Brand: AMX Pages: 24

Brands by name

Popular brands

Load more brands