HP 255 G6 Maintenance And Service Manual Download Page 68

Page: 68 / 116

TouchPad button board

Description

Spare part number

TouchPad button board

924993-001

TouchPad button board cable

924934-001

TouchPad cable

924928-001

Before removing the TouchPad button board, follow these steps:

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.

Disconnect all external devices connected to the computer.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.

Remove the battery (see

Battery on page 30

Remove the optical drive (see

Optical drive on page 31

), if installed.

Remove the bottom cover (see

Bottom cover on page 38

To remove the TouchPad button board:

Disconnect the system board cable (1) and the TouchPad cable from the TouchPad button board (2).

Remove the two Phillips PM2.0×3.0 screws (3) that secure the TouchPad button board to the computer.

Pull the TouchPad button board toward the bottom of the computer, and then remove the TouchPad
button board (4).

Reverse this procedure to install the TouchPad button board.

Chapter 6 Removal and replacement procedures for Authorized Service Provider parts

Summary of Contents for 255 G6





















































































































Search results

Summary of Contents for 255 G6

Reviews:

Related manuals for 255 G6

Brands by name

Popular brands

HP 255 G6, Maintenance And Service Manual

Search results

Summary of Contents for 255 G6

Reviews:

Related manuals for 255 G6

Brands by name

Popular brands