HP 255 G6 Maintenance And Service Manual Download Page 39

Page: 39 / 116

Optical drive

NOTE:

Optical drive spare part kits include bracket and bezel.

Description

Spare part number

DVD+/-RW Double-Layer SuperMulti Drive

920420-004

Optical drive bracket

924979-001

Optical drive bezel

Asteroid silver

929898-001

Dark ash silver

929899-001

Before removing the optical drive, follow these steps:

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.

Disconnect all external devices connected to the computer.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.

Remove the battery (see

Battery on page 30

To remove the optical drive:

Remove the Phillips PM2.5×11.0 screw (1) that secures the optical drive to the computer.

Remove the optical drive (2) by sliding it out of the optical drive bay.

Component replacement procedures

Summary of Contents for 255 G6





















































































































Search results

Summary of Contents for 255 G6

Reviews:

Related manuals for 255 G6

Brands by name

Popular brands

HP 255 G6, Maintenance And Service Manual

Search results

Summary of Contents for 255 G6

Reviews:

Related manuals for 255 G6

Brands by name

Popular brands