Heat sink
Description
Spare part number
Heat sink (includes replacement thermal material and replacement thermal material cleaning kit) 481110-001
Before removing the heat sink, follow these steps:
1.
Shut down the computer.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery on page 30
).
5.
Remove the following components:
a.
Flash drive (see
Flash drive on page 36
)
b.
WLAN module (see
WLAN module on page 34
)
c.
Optical drive (see
Optical drive on page 38
)
d.
Switch cover and keyboard (see
Switch cover and keyboard on page 40
)
e.
Display assembly (see
Display assembly on page 47
)
f.
Top cover (see
Top cover on page 52
)
g.
System board (see
System board on page 57
)
Remove the heat sink:
1.
Turn the system board upside down, with the front toward you.
2.
Following the 1, 2, 3, 4 sequence stamped into the heat sink, loosen the four Torx8 T8M2.0×10.0
screws
(1)
that secure the heat sink to the system board.
Component replacement procedures
63
Summary of Contents for 2533t - Compaq Mobile Thin Client
Page 1: ...HP 2533t Mobile Thin Client Maintenance and Service Guide ...
Page 4: ...iv Safety warning notice ...
Page 8: ...viii ...
Page 116: ......
