USB board and optical drive bezel
Description
Spare part number
USB board (includes optical drive bezel and cable)
481102-001
Before removing the USB board and optical drive bezel, follow these steps:
1.
Shut down the computer.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery on page 30
).
5.
Remove the switch cover and keyboard (see
Switch cover and keyboard on page 40
).
Remove the USB board and optical drive bezel:
1.
Turn the computer upside down, with the front toward you.
2.
Remove the two Phillips PM2.0×4.0 screws that secure the optical drive bezel to the computer.
3.
Turn the computer right-side up, with the front toward you.
4.
Disconnect the USB board cable
(1)
from the system board.
44
Chapter 4 Removal and replacement procedures
Summary of Contents for 2533t - Compaq Mobile Thin Client
Page 1: ...HP 2533t Mobile Thin Client Maintenance and Service Guide ...
Page 4: ...iv Safety warning notice ...
Page 8: ...viii ...
Page 116: ......