3.
While lifting up the power supply module latch (
1
), grasp the fan element and pull the defective
power supply assembly out of the chassis (
2
).
1
2
15557
Installing the component
1.
Lift up on the power supply module latch (
1
) and slide the assembly into the chassis until it is fully
seated (
2
).
1
2
15558
2.
Connect the AC power cord to the power supply.
3.
Engage the cord lock.
Verifying proper operation
After replacing the power supply, verify that:
•
The power supply LED is solid green.
•
No new error messages are displayed on the array controller LCD panel.
maintenance and service guide
87
Summary of Contents for 201723-B21 - HP StorageWorks Modular SAN Array 1000 Hard Drive
