Fibre Channel I/O module LEDs
The Fibre Channel I/O module has three LEDs. The following
fi
gure and table describe their locations
and meanings.
1
3
2
15587
Item
Name
Condition
Color
Meaning
Off
—
Power not applied to Fibre Channel
I/O module, controller not plugged
in, or unsuccessful controller POST
Solid
Green
Power applied and connection
established between Fibre Channel
I/O module and Fibre Channel
controller
1
Status
Blinking
Amber
Power is applied but there is no
link to the controller or there is no
c-ontroller present
Solid
Green
A 1-Gb link is established and the
status is good
2
1-Gb link status
Blinking
Amber
A 1-Gb link was established but is
now inactive
Solid
Green
A 2-Gb link is established and the
status is good
3
2-Gb link status
Blinking
Amber
A 2-Gb link was established but is
now inactive
NOTE:
If both link status lights are Off, a link has not been established since the application of power,
initiation of a reset, hot-plug of Fibre Channel I/O module, removal of the transceiver, or
hot-plug of the transceiver.
If both link status lights are blinking amber, the MSA controller has been removed or a link cannot
be established.
maintenance and service guide
25
Summary of Contents for 201723-B21 - HP StorageWorks Modular SAN Array 1000 Hard Drive
