background image

Regulatory Compliance Notices 

A-6 

HP StorageWorks Modular Smart Array 20 User Guide 

  

BSMI Notice  

 

Battery Replacement Notice 

The controller cache uses a nickel metal hydride (NiMH) battery pack.  

 

 

WARNING:  There is a risk of explosion, fire, or personal injury if the battery 
pack is not properly handled. To reduce this risk: 

• 

Do not try to recharge the batteries if they are disconnected from the 
controller. 

• 

Do not expose the battery pack to water, or to temperatures higher than 
60°C. 

• 

Do not abuse, disassemble, crush, or puncture the battery pack. 

• 

Do not short the external contacts. 

• 

Replace the battery pack only with the designated HP spare. 

Battery disposal should comply with local regulations. Alternatively, use 
established parts return methods to return the battery pack to HP for disposal. 

 

 

Batteries, battery packs, and accumulators should not be disposed of 
together with the general household waste. To forward them to recycling or 
proper disposal, use the public collection system or return them to HP, your 
authorized HP Partners, or their agents.   

For more information about battery replacement or proper disposal, contact your HP 
authorized reseller or your authorized service provider. 

 

Summary of Contents for 20 MODULAR SMART ARRAY














































Reviews: