instructions for
flammables storage cabinets
model no:
fsc07, fsc08, fsc09, fsc10
thank you for purchasing a sealey product. manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. safetY
9
Warning!
ensure Health & safety, local authority, and general workshop practice regulations are adhered to when using these
cabinets.
9
locate the cabinets in a suitable work area.
9
Keep the work area clean, uncluttered and ensure there is adequate lighting.
Warning!
use the cabinets on level and solid ground, preferably concrete.
9
Keep the cabinets clean and tidy in accordance with good workshop practice.
9
Keep children and unauthorised persons away from the work area.
9
Handle flammable liquids carefully and in accordance with all stated directions on containers.
9
evenly distribute weight on shelves, keep heavier loads on lower shelves.
8
Do not
use these cabinets for any purpose other than that for which they are designed.
8
Do not
use the cabinets outdoors.
8
Do not
place the cabinets in a damp or wet location or an area where there is condensation.
8
Do not
clean the cabinets with any solvents which may damage the surfaces or the protective coating.
8
2. introDuction
sturdy metal construction with a yellow powder coated finish. fitted with three-point key lock with recessed handle. features adjustable lipped
shelf/shelves, a liquid tight base to retain spills and two 2”BsP ventilation ports. four adjustable feet allow for the cabinet to be set level on uneven
ground. for the safe storage of flammables, acids, pesticides, paint and ink. supplied with a pack of appropriate warning labels.
3. specification
p
fsc07:
shelves: ...................................................................................1
size (W x d x H): .......................................585 x 455 x 890mm
fsc08:
shelves: ...................................................................................1
size (W x d x H): ..................................... 585 x 460 x 1120mm
fsc09:
shelves: ...................................................................................1
size (W x dx x H): ................................. 1095 x 460 x 1120mm
fsc10:
shelves: ...................................................................................2
size (W x d x H): ...................................1095 x 460 x 1655mm
4.
i
instructions
n
4.1.
this cabinet is designed for floor standing, or on an appropriate raised surface. models fsc09 and fsc10 can be used in
conjunction with a purpose made floor stand, see sealey model no: fsc11s, to raise smaller cabinets to a manageable height,
or a trolley, see model fsc11t, to aid transportation around the workplace.
4.2.
risk assessment
4.2.1.
it is important that a risk Assessment is carried out to establish that the cabinet is suitable for the intended application.
4.3.
spillage sump tray
4.3.1.
the spillage sump is an integral part of the cabinet base. the sump must not be used for storage.
fsc07, fsc08, fsc09, fsc10 | issue 1 16/11/16
Original Language Version
© Jack sealey limited
refer to
instruction
manual
