HP 17-ap000 Maintenance And Service Manual Download Page 17

Page: 17 / 91

External component identification

Right side

Component

Description

(1)

Drive light (select products only)

●

Blinking white: The hard drive is being accessed.

●

Amber: Accelerometer (safe).

(2)

Memory card reader

Reads optional memory cards that enable you to store,
manage, share, or access information.

(3)

USB 3.x SuperSpeed port with HP Sleep
and Charge

Connects a USB device, provides high-speed data
transfer, and even when the computer is off, charges
most products such as a cell phone, camera, activity
tracker, or smartwatch.

(4)

Vents

Enables airflow to cool internal components.

NOTE:

The computer fan starts up automatically to cool

internal components and prevent overheating. It is
normal for the internal fan to cycle on and off during
routine operation.

(5)

Power connector

Connects an AC adapter.

Left side

Right side

Summary of Contents for 17-ap000




























































































Search results

Summary of Contents for 17-ap000

Reviews:

Related manuals for 17-ap000

Brands by name

Popular brands

HP 17-ap000, Maintenance And Service Manual

Search results

Summary of Contents for 17-ap000

Reviews:

Related manuals for 17-ap000

Brands by name

Popular brands