HP 16610A User Manual Download Page 104

Page: 104 / 171

102

Chapter 5: Using Debuggers

Using the Green Hills Debugger

For an emulation module, see “To display current firmware version
information” on page 56. If the emulation module is not programmed with
the proper firmware, see “To update firmware using the Emulation Control
Interface” on page 56.

“command socket connection failed: WSAECONNREFUSED: connection refused”

This message usually means the emulation probe/module is not at port
#6470 on the logic analysis system.

See Also

Green Hills MULTI Software Development Environment User’s
Guide

Using MULTI with the Hewlett-Packard Processor Probe

from Green

Hills Software, Inc.

The Green Hills web site: http://www.ghs.com

See the “Configuring the Emulation Probe/Module” chapter on page 75
for more information on configuration options and the “cf” command.

Summary of Contents for 16610A












































































































































































Search results

Summary of Contents for 16610A

Reviews:

Related manuals for 16610A

Brands by name

Popular brands

HP 16610A, User Manual

Search results

Summary of Contents for 16610A

Reviews:

Related manuals for 16610A

Brands by name

Popular brands