HP 16/18-Port Cable Management Kit Installation Manual Download Page 6

Page: 6 / 14

◦

Marker pen or masking tape

◦

Diagonal cutting pliers

•

Resources: Cables of the type used by the HP BladeSystem c-Class InfiniBand switch.

1.6 Prerequisites

Before you begin to mount the bracket:

•

Follow the usual cable-handling precautions for InfiniBand cables, see the InfiniBand switch
manual that came with your switch.

•

Ensure you know how to plug in the InfiniBand cables, as described in the InfiniBand switch
manual that came with your switch.

•

Read the rack installation instructions for the c-Class enclosure.

•

Obtain the set of cabling tables required for your HP InfiniBand network.

Important:

Do not secure the enclosure into the rack before you begin the bracket installation. You must be
able to access the rear (inward) face of the rack columns.

Preparing for Installation

Summary of Contents for 16/18-Port Cable Management Kit















Search results

Summary of Contents for 16/18-Port Cable Management Kit

Reviews:

Related manuals for 16/18-Port Cable Management Kit

Brands by name

Popular brands

HP 16/18-Port Cable Management Kit, Installation Manual

Search results

Summary of Contents for 16/18-Port Cable Management Kit

Reviews:

Related manuals for 16/18-Port Cable Management Kit

Brands by name

Popular brands