Figure 1 Bracket Hardware
1
2
3
4
5
6
The following list describes the callouts in
Figure 1
:
1.
HP 16-Port or 18-Port Cable Management Bracket
2.
Releasable cable tie
3.
Holes used for the push-button mounts
4.
Push-button mount
5.
Rail-mount hook (one on each end of the bracket)
6.
Mounting hole to fasten the bracket to the rack's rear rail (one on each end of the bracket)
•
The fasteners that are specified in
Table 1
.
Table 1 Fasteners (Supplied with Cabinet Mounting Hardware)
Description
Torque
Format
Size
Qty.
Cage nut for M6 screw.
N/A
Square nut
M6 cage nuts
2
Machine screw. For use with M6 cage nut.
25-30
in/lb
Posidrive
M6 x 16mm pan
head screws
2
To prevent screws from becoming loose because of vibration, HP recommends that you use
an adjustable torque drive, set to the torque specifications given in the table above. Contact
your HP sales representative if any parts are missing.
•
18 push-button mounts (see callout 4 in
Figure 1
)
•
18 releasable cable ties (see callout 2 in
Figure 1
)
Note:
This cable management bracket might also be adaptable for other cable management solutions
(consult your hardware installation documentation).
1.5 Required Resources
To install the HP cable management kit, you require the following resources:
•
Tools:
Screwdriver, #2 (medium) Phillips
◦
◦
Cage-nut insertion tool (shipped with the rack) or a flat-headed screwdriver
1.5 Required Resources
5
Summary of Contents for 16/18-Port Cable Management Kit
Page 14: ... 538272 doc Printed in the US ...
