background image

Component

Description

CAUTION:

To prevent an unresponsive system, replace

the wireless module only with a wireless module

authorized for use in the computer by the governmental

agency that regulates wireless devices in your country or

region. If you replace the module and then receive a

warning message, remove the module to restore

computer functionality, and then contact support through

Help and Support. In Windows 78, from the Start screen,

type 

help

, and then select 

Help and Support

.

Labels

The labels affixed to the computer provide information you may need when you troubleshoot system

problems or travel in the Netherlands with the computer.

IMPORTANT:

All labels described in this section will be located in one of 3 places depending on your

computer model: Affixed to the bottom of the computer, located in the battery bay, or under the service

door.

Service label—Provides important information to identify your computer. When contacting support,

you will probably be asked for the serial number, and possibly for the product number or the model

number. Locate these numbers before you contact support.

NOTE:

Your service labels will resemble one of the examples shown below. Refer to the illustration

that most closely matches the service label on your computer.

20

Chapter 2   External component identification

Summary of Contents for 15 TouchSmart



































































































































































Reviews: