3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery on page 49
).
5.
Disconnect the WLAN module antenna cables from the WLAN module (see
WLAN module on page 58
).
6.
Remove the following components:
●
Service door (see
Service door on page 55
)
●
Top cover (see
Top cover/keyboard on page 61
)
To remove the display assembly:
1.
Disengage the adhesive and disconnect the display panel cable
(1)
from the system board.
2.
Remove the display panel cable from its routing path
(2)
.
3.
Release the wireless antenna cables from the clips
(3)
built into the base enclosure.
CAUTION:
Support the display assembly when removing the following screws. Failure to support the
display assembly can result in damage to the display assembly and other computer components.
4.
Remove the five Phillips PM2.5×5.0 screws
(1)
that secure the display assembly to the computer.
Component replacement procedures
71
Summary of Contents for 15 TouchSmart
