manualshive.com logo in svg

HP 15 Series, Maintenance And Service Manual, Page: 63 / 105

Share
Download
HP 15 Series Maintenance And Service Manual Download Page 63

TouchPad button board

Table 6-10

  TouchPad button board part descriptions and part numbers

Description

Spare part number

TouchPad button board

not spared

Before removing the TouchPad button board, follow these steps:

1.

Prepare the computer for disassembly (

Preparation for disassembly on page 33

).

2.

Remove the optical drive (see 

Optical drive on page 34

).

3.

Remove the bottom cover (see 

Bottom cover on page 38

).

4.

Remove the battery (see 

Battery on page 41

).

Remove the TouchPad button board:

1.

Disconnect the system board cable from the ZIF connector on the TouchPad button board (1).

2.

Disconnect the TouchPad cable from the ZIF connector on the TouchPad button board (2).

3.

Remove the two Phillips M2.0 × 3.0 screws (3) that secure the board to the computer.

4.

Remove the TouchPad button board from the computer (4).

Reverse this procedure to install the TouchPad button board.

Component replacement procedures

53

Summary of Contents for 15 Series










































































































Reviews:

No comments