manualshive.com logo in svg

HP 15 Series, Maintenance And Service Manual, Page: 60 / 105

Share
Download
HP 15 Series Maintenance And Service Manual Download Page 60

WLAN module

Table 6-7

  WLAN module descriptions and part numbers

Description

Spare part number

Realtek RTL8822BE 802.11ac 2 × 2 Wi-Fi + Bluetooth 4.2 Combo Adapter (MU-MIMO supported)

924813-855

Realtek RTL8821CE 802.11ac 1 × 1 Wi-Fi + Bluetooth 4.2 Combo Adapter (MU-MIMO supported)

L17365-005

Realtek RTL8723DE 802.11bgn 1 × 1 Wi-Fi + Bluetooth 4.2 Combo Adapter

L21480-005

Before removing the WLAN, follow these steps:

1.

Prepare the computer for disassembly (

Preparation for disassembly on page 33

).

2.

Remove the optical drive (see 

Optical drive on page 34

).

3.

Remove the bottom cover (see 

Bottom cover on page 38

).

4.

Remove the battery (see 

Battery on page 41

).

Remove the WLAN module:

1.

Disconnect the two antenna cables from the module (1).

2.

Remove the Phillips M2.0 × 3.0 screw (2), and then pull the module out of the socket (3).

Reverse this procedure to install the WLAN module.

50

Chapter 6   Removal and replacement procedures for authorized service provider parts

Summary of Contents for 15 Series










































































































Reviews:

No comments