HP 15-br0xx Maintenance And Service Manual Download

Page: 54 / 77

Reverse this procedure to install the power connector cable.

Display assembly

NOTE:

The display assembly is spared at the subcomponent level. For display assembly spare part

information, see the individual removal subsections.

Before removing the display assembly, follow these steps:

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.

Disconnect all external devices connected to the computer.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.

Remove the keyboard/top cover (see

Keyboard/top cover on page 24

), and then remove

the following components:

Battery (see

Battery on page 30

)

Speakers (see

Speakers on page 37

)

System board (see

System board on page 38

)

Remove the display assembly:

Remove the five Phillips PM2.5×5.7 screws (1) the Phillips PM2.5×4.6 screw (2) that secure the display
assembly to the base enclosure.

Remove the display assembly (3).

If it is necessary to replace the display panel assembly or any of the display assembly subcomponents:

NOTE:

The display panel assembly can be removed and replaced without removing the display

assembly from the base enclosure.

Chapter 5 Removal and replacement procedures

Summary of Contents for 15-br0xx














































































Search results

Summary of Contents for 15-br0xx

Reviews:

Related manuals for 15-br0xx

Brands by name

Popular brands

HP 15-br0xx, Maintenance And Service Manual

Search results

Summary of Contents for 15-br0xx

Reviews:

Related manuals for 15-br0xx

Brands by name

Popular brands