background image

System board

NOTE:

All system board spare part kits include a processor and replacement thermal material.

Description

Spare part number

Equipped with an Intel Core i7-7500U 2.70-GHz (SC turbo up to 3.56-GHz) dual core processor (4.0-GB L3 
cache, 2133-MHz FSB, 15-W), an AMD Radeon 530 R17M-M1-70 (Meso Pro) with up to 4096-MB of 
discrete video memory (512-MB×16 DDR3×4 pieces), and the Windows 10 operating system

924080-601

Equipped with an Intel Core i7-7500U 2.70-GHz (SC turbo up to 3.56-GHz) dual core processor (4.0-GB L3 
cache, 2133-MHz FSB, 15-W), an AMD Radeon 530 R17M-M1-70 (Meso Pro) with up to 4096-MB of 
discrete video memory (512-MB×16 DDR3×4 pieces), and a non-Windows operating system

924080-001

Equipped with an Intel Core i5-7200U 2.56-GHz (SC turbo up to 3.10-GHz) dual core processor (3.0-GB L3 
cache, 2133-MHz FSB, 15-W), an AMD Radeon 530 R17M-M1-70 (Meso Pro) with up to 2048-MB of 
discrete video memory (256-MB×16 DDR3×4 pieces), and the Windows 10 operating system

924081-601

Equipped with an Intel Core i5-7200U 2.56-GHz (SC turbo up to 3.10-GHz) dual core processor (3.0-GB L3 
cache, 2133-MHz FSB, 15-W), an AMD Radeon 530 R17M-M1-70 (Meso Pro) with up to 2048-MB of 
discrete video memory (256-MB×16 DDR3×4 pieces), and a non-Windows operating system

924081-001

Equipped with an Intel Core i5-7200U 2.56-GHz (SC turbo up to 3.10-GHz) dual core processor (3.0-GB L3 
cache, 2133-MHz FSB, 15-W), an Intel HD Graphics 620 subsystem with UMA video memory, and 
the Windows 10 operating system for use only computer models equipped with an infrared camera

924077-601

Equipped with an Intel Core i5-7200U 2.56-GHz (SC turbo up to 3.10-GHz) dual core processor (3.0-GB L3 
cache, 2133-MHz FSB, 15-W), an Intel HD Graphics 620 subsystem with UMA video memory, and a non-
Windows operating system for use only computer models equipped with an infrared camera

924077-001

Equipped with an Intel Core i3-7100U 2.40-GHz dual core processor (3.0-GB L3 cache, 2133-MHz FSB, 
15-W), an AMD Radeon 530 R17M-M1-70 (Meso Pro) with up to 2048-MB of discrete video memory 
(256-MB×16 DDR3×4 pieces), and the Windows 10 operating system

924082-601

Equipped with an Intel Core i3-7100U 2.40-GHz dual core processor (3.0-GB L3 cache, 2133-MHz FSB, 
15-W), an AMD Radeon 530 R17M-M1-70 (Meso Pro) with up to 2048-MB of discrete video memory 
(256-MB×16 DDR3×4 pieces), and a non-Windows operating system

924082-001

Equipped with an Intel Core i3-7100U 2.40-GHz dual core processor (3.0-GB L3 cache, 2133-MHz FSB, 
15-W), an Intel HD Graphics 620 subsystem with UMA video memory, and the Windows 10 
operating system

924078-601

Equipped with an Intel Core i3-7100U 2.40-GHz dual core processor (3.0-GB L3 cache, 2133-MHz FSB, 
15-W), an Intel HD Graphics 620 subsystem with UMA video memory, and a non-Windows 
operating system

924078-001

Equipped with an Intel Pentium 4415U 2.36-GHz dual core processor (2.0-GB L3 cache, 2133-MHz FSB, 
15-W), an Intel HD Graphics subsystem with UMA video memory, and the Windows 10 operating system

924079-601

Equipped with an Intel Pentium 4415U 2.36-GHz dual core processor (2.0-GB L3 cache, 2133-MHz FSB, 
15-W), an Intel HD Graphics subsystem with UMA video memory, and a non-Windows operating system

924079-001

Before removing the system board, follow these steps:

1.

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn 
the computer on, and then shut it down through the operating system.

2.

Disconnect all external devices connected to the computer.

3.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and 
then unplugging the AC adapter from the computer.

4.

Remove the keyboard/top cover (see 

Keyboard/top cover on page 24

).

38

Chapter 5   Removal and replacement procedures

Summary of Contents for 15-br0xx














































































Reviews: