HP 14-bw0 Series, Maintenance And Service Manual

Page: 56 / 108

M.2 Solid-state drive (SSD) or eMMC module
Description Spare part number
M.2 solid-state drive, 256 GB 865902-018
M.2 solid-state drive, 128 GB 827560-049
eMMC module, 128 GB 833958-007
eMMC module, 64 GB 786461-013
eMMC module, 32 GB 779066-023
Before removing the solid-state drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see Battery on page 32 ).
5. Remove the optical drive (see Optical drive on page 33 ), if installed.
6. Remove the bottom cover (see Bottom cover on page 39 ).
Remove the solid-state drive:
1. Remove the Phillips PM2.0×2.0 screw (1) that secures the drive to the system board.
2. Remove the drive (2) by pulling it away from the connector.
NOTE: Solid-state drives are designed with notches to prevent incorrect insertion.
Reverse this procedure to reassemble and install the solid-state drive.
48 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts