HP 14-bw0 Series Maintenance And Service Manual Download Page 16

Page: 16 / 108

Display

Component

Description

(1)

WLAN antennas*

Send and receive wireless signals to communicate with wireless local
area networks (WLANs).

(2)

Camera light

On: The camera is in use.

(3)

Camera

Allows you to video chat, record video, and record still images.

(4)

Internal microphone

Records sound.

*The antennas are not visible from the outside of the computer, and antenna location varies. For optimal transmission, keep the areas
immediately around the antennas free from obstructions.

For wireless regulatory notices, see the section of the Regulatory, Safety, and Environmental Notices that applies to your country or
region.

To access this guide:

▲

Select the Start button, select HP Help and Support, and then select HP Documentation.

Chapter 2 Getting to know your computer

Summary of Contents for 14-bw0 Series













































































































Search results

Summary of Contents for 14-bw0 Series

Reviews:

Related manuals for 14-bw0 Series

Brands by name

Popular brands

HP 14-bw0 Series, Maintenance And Service Manual

Search results

Summary of Contents for 14-bw0 Series

Reviews:

Related manuals for 14-bw0 Series

Brands by name

Popular brands