manualshive.com logo in svg

HP 14-bw0 Series, Maintenance And Service Manual

Share
Download
HP 14-bw0 Series Maintenance And Service Manual Download Page 15

Component

Description

(7)

USB 3.x SuperSpeed ports (2)

Connect a USB device, such as a cell phone, camera, activity 
tracker, or smartwatch, and provides high-speed data transfer.

(8)

Audio-out (headphone)/Audio-in (microphone) 
combo jack

Connects optional powered stereo speakers, headphones, 
earbuds, a headset, or a television audio cable. Also connects an 
optional headset microphone. This jack does not support 
optional standalone microphones.

WARNING!

To reduce the risk of personal injury, adjust the 

volume before putting on headphones, earbuds, or a headset. 
For additional safety information, refer to the Regulatory, 
Safety, and Environmental Notices.

To access this guide:

▲

Select the Start button, select HP Help and Support, and 
then select HP Documentation.

NOTE:

When a device is connected to the jack, the computer 

speakers are disabled.

Left side

7

Summary of Contents for 14-bw0 Series













































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands