HP 14-bf000, Maintenance And Service Manual

Page: 65 / 90

Power connector cable
Description Spare part number
Power connector cable 938151-001
Before removing the power connector cable, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the bottom cover (see Bottom cover on page 27 ).
5. Remove the battery (see Battery on page 29 ).
6. Remove the WLAN module (see WLAN module on page 30 ).
7. Remove the memory module (see Memory module on page 32 ).
8. Remove the hard drive (see Hard drive on page 33 ).
9. Remove the solid-state drive (see Solid-state drive (SSD) on page 35 ).
10. Remove the fan assembly (see Fan on page 39 ).
11. Remove the display (see Display assembly on page 43 ).
12. Remove the system board (see System board on page 53 ).
To remove the power connector cable:
▲ Disconnect the cable from the removed system board.
Reverse this procedure to install the power connector cable.
Component replacement procedures 57