HP 14-bf000, Maintenance And Service Manual

Page: 41 / 90

Hard drive
NOTE: The hard drive spare part kit does not include the hard drive bracket or cable.
Description Spare part number
Hard drives (7 mm):
2-TB, 5400-rpm 912487-855
1-TB, 5400-rpm 762990-005
500-GB, 5400-rpm 778186-005
Hard drive bracket
Left 934983-001
Right 934984-001
Hard drive connector/cable 930596-001
Before removing the hard drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the bottom cover (see Bottom cover on page 27 ).
5. Remove the battery (see Battery on page 29 ).
To remove the hard drive:
1. Disconnect the hard drive connector cable from the system board (1).
2. Remove the four Phillips PM2.0×3.0 screws (2) that secure the hard drive assembly to the computer.
Component replacement procedures 33