manualshive.com logo in svg

HP 10Gb Ethernet BL-c, Command Reference Manual

The HP 10Gb Ethernet BL-c module is a high-performance networking solution for your business needs. Unlock its full potential by referring to the comprehensive Command Reference Manual. Download the manual for free from manualshive.com and explore the advanced features and functionalities that this product offers.

Share
Download
background image

 

 

 

Configuration Menu  117  

 

 

offers the following advantages over RADIUS as the authentication device: 

•

 

is TCP-based, so it facilitates connection-oriented traffic. 

•

 

It supports full-packet encryption, as opposed to password-only in authentication requests. 

•

 

It supports decoupled authentication, authorization, and accounting. 

The following table describes the Server Configuration Menu options. 

Table 83 

  Server Configuration Menu options

 

Command Description 

prisrv <

IP address

>

 

Defines the primary  server address. 

secsrv <

IP address

>

 

Defines the secondary server address. 

secret <

1-32 characters

>

 

This is the shared secret between the switch and the server(s). 

secret2 <

1-32 characters

>

 

This is the secondary shared secret between the switch and the 

 server(s). 

port <

TCP port number

>

 

Enter the number of the TCP port to be configured, between 1 and 
65000. The default is 49. 

retries <

1-3

>

 

Sets the number of failed authentication requests before switching to a 

different server. The range is 1-3 requests. The default is 3 
requests. 

timeout <

4-15

>

 

Sets the amount of time, in seconds, before a server 

authentication attempt is considered to have failed. The range is 4-15 
seconds. The default is 5 seconds. 

bckdoor enable|disable

 

Enables or disables the  back door for Telnet, SSH/SCP,  

or HTTP/HTTPS.  
Enabling this feature allows you to bypass the  servers. It is 

recommended that you use Secure Backdoor to ensure the switch is 
secured, because Secure Backdoor disallows access through the back 

door when the  servers are responding. 
The default value is 

disabled

. 

secbd enable|disable

 

Enables or disables  secure back door access through Telnet, 
SSH/SCP, or HTTP/HTTPS only when the  servers are not 

responding.  
This feature is recommended to permit access to the switch when the 
servers become unresponsive. If no back door is enabled, the 

only way to gain access when  servers are unresponsive is to 
use the back door via the console port. The default value is 

disabled

. 

cmap enable|disable

 

Enables or disables  privilege-level mapping. 
The default value is 

disabled

. 

usermap <

0-15

> 

user|oper|admin|none

 

Maps a  authorization level to a switch user level. Enter a 
 authorization level (0-15), followed by the corresponding HP 

10GbE switch user level. 

on

 

Enables the  server. 

off

 

Disables the server. 

cur

 

Displays current configuration parameters. 

 

Summary of Contents for 10Gb Ethernet BL-c





































































































































































































































Reviews:

No comments

Related manuals for 10Gb Ethernet BL-c

H3C Mini Series Manual preview
Mini Series
Brand: H3C Pages: 17
Murphy Temperature SWICHGAGE SPL Owner'S Manual preview
Temperature SWICHGAGE SPL
Brand: Murphy Pages: 4
Waters Network Systems ES1008-MSC Operating Manual preview
ES1008-MSC
Brand: Waters Network Systems Pages: 16
Moxa Technologies EtherDevice EDS-4009 Series Quick Installation Manual preview
EtherDevice EDS-4009 Series
Brand: Moxa Technologies Pages: 18
TP-Link TL-SG108E Installation Manual preview
TL-SG108E
Brand: TP-Link Pages: 2
KCC KTD-600 Series Manual preview
KTD-600 Series
Brand: KCC Pages: 6
Icy Box IB-AC618 Manual preview
IB-AC618
Brand: Icy Box Pages: 6
Vivotek AW-FGT-100C-120 Quick Installation Manual preview
AW-FGT-100C-120
Brand: Vivotek Pages: 2
Festo SOEL-RTH-Q20 Manual preview
SOEL-RTH-Q20
Brand: Festo Pages: 2
N-Tron 709FX Series User Manual & Installation Manual preview
709FX Series
Brand: N-Tron Pages: 196
Omega iServer MicroServer EIS-2B User Manual preview
iServer MicroServer EIS-2B
Brand: Omega Pages: 68
BERNSTEIN CSMS-M-R-H-KA Installation And Operating Instructions Manual preview
CSMS-M-R-H-KA
Brand: BERNSTEIN Pages: 38
serverLink SL-271-H Quick Installation Manual preview
SL-271-H
Brand: serverLink Pages: 2
LEGRAND Pro 21 7756 28 Manual preview
Pro 21 7756 28
Brand: LEGRAND Pages: 197
Valcom V-2971 Connections preview
V-2971
Brand: Valcom Pages: 1
Conrad RSLT2 Operating Instructions Manual preview
RSLT2
Brand: Conrad Pages: 8
Aviosys IP Power 9258 DS User Manual preview
IP Power 9258 DS
Brand: Aviosys Pages: 37
Black Box Peripheral Sharer 2 to 1 Manual preview
Peripheral Sharer 2 to 1
Brand: Black Box Pages: 35

Brands by name

Popular brands

Load more brands