manualshive.com logo in svg

HP 10Gb Ethernet BL-c, Command Reference Manual

The HP 10Gb Ethernet BL-c module is a high-performance networking solution for your business needs. Unlock its full potential by referring to the comprehensive Command Reference Manual. Download the manual for free from manualshive.com and explore the advanced features and functionalities that this product offers.

Share
Download
background image

 

 

 

Statistics Menu  103  

 

 

SNMP statistics 

Command:

  

/stats/snmp 

 

SNMP statistics: 

snmpInPkts:                 54   snmpInBadVersions:              0 

snmpInBadC'tyNames:          0   snmpInBadC'tyUses:              0 

snmpInASNParseErrs:          0   snmpEnableAuthTraps:            0 

snmpOutPkts:                54   snmpInBadTypes:                 0 

snmpInTooBigs:               0   snmpInNoSuchNames:              0 

snmpInBadValues:             0   snmpInReadOnlys:                0 

snmpInGenErrs:               0   snmpInTotalReqVars:           105 

snmpInTotalSetVars:          0   snmpInGetRequests:              2 

snmpInGetNexts:             52   snmpInSetRequests:              0 

snmpInGetResponses:          0   snmpInTraps:                    0 

snmpOutTooBigs:              0   snmpOutNoSuchNames:             2 

snmpOutBadValues:            0   snmpOutReadOnlys:               0 

snmpOutGenErrs:              0   snmpOutGetRequests:             0 

snmpOutGetNexts:             0   snmpOutSetRequests:             0 

snmpOutGetResponses:        54   snmpOutTraps:                   0 

snmpSilentDrops:             0   snmpProxyDrops:                 0 

The following table describes the Simple Network Management Protocol (SNMP) statistics: 

Table 75 

 SNMP statistics

 

Statistics Description 

snmpInPkts

 

The total number of messages delivered to the SNMP entity from the transport 
service. 

snmpInBadVersions

 

The total number of SNMP messages, which were delivered to the SNMP protocol 
entity and were for an unsupported SNMP version. 

snmpInBadC'tyNames

  The total number of SNMP messages delivered to the SNMP entity that used an 

SNMP community name not known to the switch. 

snmpInBadC'tyUses

 

The total number of SNMP messages delivered to the SNMP protocol entity that 

represented an SNMP operation which was not allowed by the SNMP community 
named in the message. 

snmpInASNParseErrs

  The total number of ASN.1 (Abstract Syntax Notation One) or BER (Basic Encoding 

Rules), errors encountered by the SNMP protocol entity when decoding SNMP 
messages received. 
The Open Systems Interconnection (OSI) method of specifying abstract objects is 
called ASN.1 (Abstract Syntax Notation One, defined in X.208), and one set of 

rules for representing such objects as strings of ones and zeros is called the BER 

(Basic Encoding Rules, defined in X.209).  
ASN.1 is a flexible notation that allows one to define a variety of data types, from 

simple types such as integers and bit strings to structured types such as sets and 
sequences.  
BER describes how to represent or encode values of each ASN.1 type as a string of 

eight-bit octets. 

snmpEnableAuthTraps

  An object to enable or disable the authentication traps generated by this switch. 

snmpOutPkts

 

The total number of SNMP messages which were passed from the SNMP protocol 

entity to the transport service. 

snmpInBadTypes

 

The total number of SNMP messages which failed ASN.1 parsing. 

Summary of Contents for 10Gb Ethernet BL-c





































































































































































































































Reviews:

No comments

Related manuals for 10Gb Ethernet BL-c

KELCO D40 Installation And Operating Instructions preview
D40
Brand: KELCO Pages: 2
H3C s5820x series Quick Start Manual preview
s5820x series
Brand: H3C Pages: 32
H3C S5830V2 series Mce Command Reference preview
S5830V2 series
Brand: H3C Pages: 22
H3C s5820x series Command Reference Manual preview
s5820x series
Brand: H3C Pages: 488
H3C S10500X Series Installation, Quick Start preview
S10500X Series
Brand: H3C Pages: 3
H3C S7500 Series Manual preview
S7500 Series
Brand: H3C Pages: 8
H3C S7500 Series Command Manual preview
S7500 Series
Brand: H3C Pages: 25
H3C S12500 Series Manual preview
S12500 Series
Brand: H3C Pages: 31
H3C S12500 Series Interface Configuration Manual preview
S12500 Series
Brand: H3C Pages: 23
H3C S12500 Series Software Upgrade preview
S12500 Series
Brand: H3C Pages: 24
H3C S12500 Series Installation Instructions Manual preview
S12500 Series
Brand: H3C Pages: 126
H3C S12500-X Configuration Manual preview
S12500-X
Brand: H3C Pages: 42
H3C S6300 Series Troubleshooting Manual preview
S6300 Series
Brand: H3C Pages: 32
H3C S7500 Series Installation Manual preview
S7500 Series
Brand: H3C Pages: 13
H3C S12500 Series Reference preview
S12500 Series
Brand: H3C Pages: 16
H3C S12500 Series Configuration Manual preview
S12500 Series
Brand: H3C Pages: 39
Eaton ATC-900 Manual preview
ATC-900
Brand: Eaton Pages: 40
Communica CST-2042 User Manual preview
CST-2042
Brand: Communica Pages: 5

Brands by name

Popular brands

Load more brands