Front Bezel
Description
Spare part number
Front bezel
646780-001
The front bezel is secured to the display panel bracket with eight screws.
To remove the front bezel:
1.
Prepare the computer for disassembly (see
Preparing to Disassemble the Computer
on page 26
).
2.
Remove the rear cover (see
Rear Cover on page 27
).
3.
Remove the speakers (see
Speakers on page 45
).
4.
Remove the power button board (see
Power Button Board and Cable on page 60
).
5.
Remove the webcam (see
Webcam Module and Cable on page 49
).
6.
Push the display cable through the hole in the cover.
7.
Move aside any remaining cables that impede removal of the cover.
8.
Remove the eight screws that secure the bezel to the display bracket.
Figure 6-55
Removing the front bezel
9.
Separate the bezel from the display panel bracket.
To replace the front bezel, reverse the removal procedures.
Front Bezel
71
Summary of Contents for 100B - All-in-One PC
Page 1: ...Maintenance Service Guide HP 100B All in One PC ...
Page 4: ...iv About This Book ...
Page 8: ...viii ...
