Computer Setup—Security
NOTE:
Support for specific Computer Setup options may vary depending on the hardware
configuration.
Table 2-4
Computer Setup—Security
Option
Description
Setup Password
Allows you to set and enable a setup (administrator) password.
NOTE:
If the setup password is set, it is required to change Computer Setup options, flash the
ROM, and make changes to certain plug and play settings under Windows.
See the
Desktop Management Guide
for more information.
Power-On Password
Allows you to set and enable a power-on password. The power-on password prompt appears
after a power cycle. If the user does not enter the correct power-on password, the unit will not
boot.
NOTE:
This password does not appear on warm boots , such as
Ctrl
+
Alt
+
Delete
or
Restart
from Windows
, unless enabled in
Password Options
(see below).
See the
Desktop Management Guide
for more information.
Device Security
Allows you to set Device Available/Device Hidden for:
●
System audio
●
Network controllers (some models)
●
SATA0
●
SATA1
USB Security
Allows you to enable or disable groups of USB ports or individual USB ports:
●
Front USB Ports
◦
USB Port 11
◦
USB Port 13
●
Rear USB Ports
◦
USB Port 0
◦
USB Port 1
◦
USB Port 4
◦
USB Port 9
●
Accessory USB Ports
◦
USB Port 3
◦
USB Port 12
Slot Security
Allows you to disable or enable the mini card slot
Network Service Boot
Enables/disables the computer’s ability to boot from an operating system installed on a network
server.
Computer Setup (F10) Utilities
7
Summary of Contents for 100B - All-in-One PC
Page 1: ...Maintenance Service Guide HP 100B All in One PC ...
Page 4: ...iv About This Book ...
Page 8: ...viii ...
