60
HP
Velotechnik
Warranty Pass
Service plan
(continued)
parts
work
hubs
check bearing play and brake discs mount
pedal
check bearing play, check binding mechanism
frame
check clamping of the front boom
clean and conserve
check for damage, damage to paintwork
quick release
check correct closing
derailleur
check for movement and function
clean and lubricate
screws and nuts
check and tighten
mudguards
check for damage and correct position
valves
check for correct position and air tightness
stem
check clamping
check clamping screws
cables
dismount, lubricate, replace if necessary
This service plan is intended to give you a
rough overview over the required maintenan-
ce and service works. In no case it can replace
the detailed instructions in this manual!
You can perform service works marked with a
"
●
" if you have the required skills and tools as
for example a torque wrench.
If you discover any defects while checking your
bicycle they have to be repaired immediately. If
you are in doubt please consult your local bike
shop.
Works marked with a "
▲
" should only be car-
ried out by a trained bicycle mechanic.
At the annual service the bicycle mechanic has
to carry out all works listed as well as all ser-
vices and maintenance works necessary accor-
ding to the momentary technical standard and
professional knowledge.
Please follow at any rate the manuals of the
parts manufacturers.
