HP Velotechnik Gekko fx 20, Operating Manual And Service Instructions

Page: 90 / 104

86
Tightening torques
Table of tightening torques for all Scorpion models
The values indicated are meant for a friction value — =0,125 (greased threads and screw heads). They only refer
to the indicated parts. Please do always follow the values given in the manuals of the parts manufacturers since
the following values may not be up to date due to changes in the product line!
part connection screw tightening torque
V-brake
- brake lever handlebar/grip M6 SW5 4 Nm
- brake caliper - caliper/frame M6 SW5 5 – 7 Nm
- cable clamping M6 SW5 6 – 8 Nm
disc brake
- brake lever handlebar/brake lever clamping M6 SW5 4 Nm
- brake caliper caliper/frame M6 SW5 7 – 9 Nm
- brake disc disc/hub M5 Torx T25 5 – 6 Nm
- brake tube brake tube/brake lever SW8 4 Nm
dynamo dynohub/mounting sheet M6 SW5 6 – 8 Nm
mounting sheet/frame M5 SW4 4 – 6 Nm
folding hinge locking wedge screw M6 SW4 6 Nm
suspension element frame/susp. element/swing arm M6 SW4 6 – 8 Nm
rear rack at the seat tube M6 SW5 7 – 9 Nm
swing arm axle/frame M12x1 SW6 17 – 19 Nm
bottom bracket cartridge/frame
50
–
60 Nm
chain idler chain idler/frame M8 SW6 17 – 19 Nm
crank crank/axle SW8 35 Nm
chain ring screws SW5 8 – 11 Nm
hub cassette ring
38
–
42 Nm
front hub quick mount M8 SW5/SW6 8 – 10 Nm
quick release lever 9 – 12 Nm
pedal pedal/crank SW15 35
–
40 Nm
shifting lever twist shifter SW3 2 – 2,5 Nm
barend shifter SW6 5 – 6 Nm
derailleur derailleur/frame SW5 8 – 10 Nm
cable clamping SW5 4 – 6 Nm
mud guard stays/frame M5 SW4 4 – 5 Nm
seat upper seat/seat mount M6 SW4 5 – 6 Nm
lower seat/seat mount M6 SW4 3 – 4 Nm
frame front boom clamping M8 SW6 14 – 16 Nm
front derailleur front derailleur/frame M5 SW5 5 – 6 Nm
cable clamping M5 SW5 4 – 6 Nm
handlebar handlebar/stem M6 SW5 8 – 10 Nm
stem main axle/bearing SW6 6 – 8 Nm
front axle A-Head-cap M6 SW5 1 – 2 Nm
clamp on stanchion tube M6 SW5 7 – 9 Nm
steering rod/knuckles M6 SW5 7 – 9 Nm
wishbone/strut M6 SW 10 9 – 10 Nm
wishbone/main frame M8 SW5 13 – 15 Nm
wishbone/main frame M6 SW4 7 – 9 Nm