Safety instructions (bicycle)
10
Position for identification mark on the Scorpion fs 26
frames
Scorpion, Scorpion fs 20 and Scorpion fx
On Scorpion, Scorpion fs 20 and Scorpion fx
use the lower stay on the right side of the
gusset sheet for identification numbers, as like
the position of the frame number on the
other side.
Position of frame number on Scorpion fs 20 and Scor-
pion fx
Gekko fx 20, Gekko fx 26
On Gekko fx 20 and Gekko fx 26 frames, the
identification number can be engraved besides
the frame number on the cross tubes gusset
sheet. (Some older models have the frame
number engraved on the rear end between
the chain stays facing to the tire.)
Position of frame number on Gekko models
Added parts and accessories
Attention!
Mounting additional
parts or accessories is at your own risk. It
is important that you carefully read the in-
stallation guide of the manufacturer. Addi-
tions to the handlebar like fairings,
handlebar fittings, bottle holders, etc. may
impair your safety due to additional loading
or clips with sharp edges.
Additional accessories may impair the func-
tion of your recumbent tricycle. We advise
you to generally ask your dealer before you
mount any special parts or accessories to
your tricycle.
Take care that the handlebar and the suspen-
sion always stay moveable. You must not add
any parts to the handlebar or the seat that
might endanger the rider through sharp edged
or pointed shapes while steering, getting on
and off the tricycle or bumping against some-
thing.
Before you purchase a bell or a lighting sys-
tem make sure that these accessories con-
form to your national laws and regulations.
Additional accessories may invalidate the op-
erating licence or impair the function of your
S-Pedelec. This may also be valid for accesso-
