![HP Velotechnik Gekko fx 20 Operating Manual And Service Instructions Download Page 102](http://html1.mh-extra.com/html/hp-velotechnik/gekko-fx-20/gekko-fx-20_operating-manual-and-service-instructions_2175487102.webp)
Service plan
98
Service plan
part work
lighting system
check function
adjust headlamp and rear light, check cable contacts
clean reflectors, replace missing reflectors
tires check
air
pressure
check tread and sidewalls
brakes check
for
damages
check for leaking oil
check rigid feel brake lever blades when pads reach rotor
check brake pads for wear
suspension element
clean and oil thread, push rod, air chamber
lubricate
bushes
replace worn out parts / hydraulic cartridge
suspension struts front
check shock boot and clean stanchion tube
(not for Scorpion, Scor- disassemble, lubricate
Gekko fx 20 and
check for play
Gekko fx 26)
replace worn out parts
rear swing arm
check function and bearing play, tighten axle screws
bottom bracket bearings check bearing play
rims
check wall thickness, wear, condition
chain
grease and check for wear
chain tubes
check for wear
expand ends or exchange tubes
chain roller
check for wear, check bearing
crank check,
tighten
paintwork conserve
and
repair
wheels
check alignment and spoke tension
handlebar
check for damage / bends
check track rod for proper mounting
headset
no headset used on full suspension models (service suspension strut bearings in-
hubs
check bearing play and brake discs mounting
pedal
check bearing play, check binding mechanism
frame
check clamping of the front boom
clean
and
conserve
check for damage, damage to paintwork
quick release
check correct closing
derailleur
check for movement and function
clean
and
lubricate
screws and nuts
check and tighten
mudguards
check for damage and correct position
valves
check for correct position and air tightness
stem check
clamping
check
clamping
screws
cables
dismount, lubricate, replace if necessary