HP Compaq Compaq 370698-001 Reference Manual Download Page 45

Page: 45 / 108

Battery Packs and Power Management

Reference Guide

3–7

In addition, follow these suggestions to extend the life of your
battery packs:

■

Do not leave battery packs unused for long periods. If you
have more than one, rotate them.

■

Unplug the AC adapter when the notebook is not in use.

■

If the notebook will be unused and unplugged for more than
2 weeks, remove and store the battery pack.

CAUTION:

To prevent damage to the battery pack, do not expose it to

high temperatures for extended periods of time.

■

High temperatures accelerate the self-discharge rate of a
stored battery pack. To prolong the charge of a stored battery
pack, place it in a cool, dry location.

■

To maintain the accuracy of battery charge displays, calibrate
a battery pack that has been stored for one month or more
before using it.

■

Avoid using or charging battery packs at high temperatures.

Summary of Contents for Compaq 370698-001













































































































Search results

Summary of Contents for Compaq 370698-001

Reviews:

Related manuals for Compaq 370698-001

Brands by name

Popular brands

HP Compaq Compaq 370698-001, Reference Manual

Search results

Summary of Contents for Compaq 370698-001

Reviews:

Related manuals for Compaq 370698-001

Brands by name

Popular brands