HP Compaq Compaq 370698-001 Reference Manual Download Page 13

Page: 13 / 108

Getting Started with Your Notebook

Reference Guide

1–5

Status Lights

The notebook includes a number of status lights that report power
and battery status, drive activity, and keyboard functions such as
Caps Lock and Num Lock.

The following diagram shows the main status lights on the front
of the notebook.

Power mode

■

On:

Notebook is on (even if the display is off).

■

Blinking:

Notebook is in Standby.

■

Off:

Notebook is off or in Hibernation.

Hard drive activity

On:

Notebook is accessing the hard drive.

Battery status

■

Green:

AC adapter is connected and the battery pack is fully

charged.

■

Amber:

AC adapter is connected and the battery pack is

charging.

■

Blinking:

AC adapter is connected and the battery pack is

missing or has a fault.

■

Off:

AC adapter is not connected.

Summary of Contents for Compaq 370698-001













































































































Search results

Summary of Contents for Compaq 370698-001

Reviews:

Related manuals for Compaq 370698-001

Brands by name

Popular brands

HP Compaq Compaq 370698-001, Reference Manual

Search results

Summary of Contents for Compaq 370698-001

Reviews:

Related manuals for Compaq 370698-001

Brands by name

Popular brands