Hozelock Cyprio EasyClear 6000LV, Installation And Operating Instructions Manual

Page: 9 / 72

Foam & UV Lamp becomes unserviceable within 3
years of the date of purchase it will be repaired
or replaced at our option free of charge, unless
in our opinion it has been damaged or misused.
Liability is not accepted for damage due to
accident, improper installation or use.
Liability is limited to replacement of a faulty unit.
This guarantee is not transferable. It does not
affect your statutory rights.
To obtain the benefits of the guarantee, firstly
contact Hozelock Cyprio Consumer Services who
may request that the filter is sent along with
proof of purchase directly to the address
provided.
DAMAGE CAUSED BY RUNNING THE EASYCLEAR
OUT OF WATER OR BY FROST INVALIDATES THE
GUARANTEE.
Hozelock Limited
Midpoint Park, Birmingham. B76 1AB
Tel : +44 (0) 121 313 1122
Internet : www.hozelock.com
Email : info@hozelock.com
Contact Details
Please read the safety sections of these instructions before carrying out any remedial action on the
EasyClear! It may also be necessary to refer to the maintenance section of these instructions.
LOW FLOW FROM PUMP a – The foams may be blocked and require cleaning
b - Ensure the outer cage is clean.
c - Clear any blockages and adjust the flow controls.
d - Check white flap inside pump chamber moves freely.
e - Ensure rotor is clean and moves freely.
POOR FOUNTAIN DISPLAY a – As above
b - Clean the Fountain Head.
UV LAMP NOT WORKING a - Check power supply is on.
b - Check fuse, RCD and wiring.
c - Replace the lamp.
PUMP NOT WORKING a - Check power supply is on.
b - Check fuse, RCD and wiring.
c - Check the rotor is not blocked
d - The Overload Protection may have operated – see Overload
Protection section.
e - Ensure the outer cage is clean.
f – Check for water ingress in lamp area
Fault Finding
33856 EASYCLEAR 6000lv UI's(29-8-8) 29/8/08 14:16 Page 9