2
■
Accompanied with the continuous energizing limiter.
When you press the measurement switch, the power turns off automatically in about
35 seconds (about 20 seconds by switching mode).
This product was designed based upon the Japanese standard for ESD measures.
* Code Jack - resistance between conductive pads
*1 [Reference] RCJS-5-1 Requirements Accuracy used in acceptance test: ± 20%
Specifications
Measuring range
Body
Electrode
Applied voltage
Accuracy guarantee range
Accuracy
Power source
Battery durability
Usage environment
Dimensions
Weight
Quantity
Dimensions
Resistance *
Weight
2 pieces
79 mm
φ
110 mm Conductive pad 63.5 mm
φ
400
Ω
or less
2.3 kg (1 piece)
9.00×10
2
Ω
or over, less than 2.00×10
12
Ω
1.00×10
3
Ω
or over, less than 1.00×10
12
Ω
± 10% (± 20% for 1.00 × 10
11
Ω
or higher) *1
When less than 1.00 x 10
6
Ω
...10 V ± 5%
switched
automatically
When 1.00 x 10
6
Ω
or over ...100 V ± 5%
Alkaline battery 6LR61 or 6LF22
60% RH or less (without dew condensation on this machine)
*Always use alkaline batteries.
85(W) x 40(H) x 170(D) mm (without projections)
300 g (without battery)
1000 times or more (in constant measurement mode)
These symbols are used throughout the instruction manual to alert the user to potential
safety hazards as follows:
… Notice when incorrect handling could cause the user's death or serious
injury.
… Notice when incorrect handling could cause injury to the user or material
damage.
Even if the instructions do not have mark, there are some possibilities
for a serious situation. Follow the instructions.
Warning
Warning and caution symbols
Caution
Caution
