© 2019 Hoymiles Converter Technology Co., Ltd. All rights reserved.
13
HME-1000T/1200T/1350T/1500T-AU
Step 3. Install AC End Cable
A)
Prepare the AC end cable with the proper length, and insert one side of the cable into the cap.
Match the L, N and Ground line into the slot accordingly. Tighten the screws, and then tighten the cap
back to the port. Plug the upper cover back to the bus connector.
B) Connect the other side of the AC end cable to the distribution box, and wire it to the local grid
network.
Step 4. Create an Installation Map
A) Peel the removable serial number lable from each microinverter (The position of the label is
shown as below).
B)
Affix the serial number label to the respective location on the installation map.
Summary of Contents for HME-1000T-AU
Page 1: ...Version 1 2 June 2020...
