22
Current temperature in the burning chamber
Temperature currently measured by the
high-temperature sensor.
Burning time
Begins with closing the door.
Air flap positions / burning phases
The ABRA 6.1 control doesn’t regulate the burning
process in intervals with fixed time for each phase.
This is due to varying burning conditions (humidity,
firewood quantity, chimney draft etc.) The length
and the course of the burning process is therefore
derived from the maximum reached temperature
T
max
in the second burning phase.
OPERATION
Po1
T
start
T
max
Po2
Po3
Po4
Po5
time
te
m
pe
ra
tu
re
INFORMATION ON DISPLAY
Information on the display is updated every 5 seconds. For instant update or
to activate the display from the stand-by mode press an arrow.
During the operation is the display
showing three basic values:
